午夜爱爱福利,国产三级播放,亚洲国产字幕

BYD lithium battery forklift maintenance and maintenance methods -

In a low temperature environment, the battery of an electric forklift will consume more power faster, the charging time will be longer, and the use time will be greatly shortened

When the vehicle needs to slow down, release the accelerator pedal and lightly step on the brake pedal, so that the energy of deceleration can be fully utilized

If there is no damage, but it just needs maintenance, we can do it ourselves

Mast: At present, most electric forklifts have adopted wide-view masts, and the lifting hydraulic cylinders are placed on both sides instead of in the middle

We must strengthen the supervision of forklift operators

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

Lithium batteries save more than 40% of electricity

Electric forklift manufacturers tell you that the smaller the minimum turning radius, the more flexible the electric forklift is Its smart handle integrates all switch buttons in the best reach position for easy operation

There are four inspection windows at the commutator end of the railway train motor for regular inspection and maintenance of the motor commutator and replacement of brushes

The above are two common problems with the plates of all-electric transporter batteries

After lowering the forks to the lowest position, withdraw the electric pallet truck

2 What are the functions of BYD forklifts? What are the functions of BYD forklifts? I believe everyone knows a little about forklifts

BYD lithium battery forklift maintenance and maintenance methods -

BYD forklift solutions for food-grade logistics and handling operations: In the field of logistics, food, medicine, and technology have relatively high requirements for logistics equipment and operations

It is very necessary to add a camera behind the forklift to give the driver an eye, which greatly helps the driver to avoid collision when reversing

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

The lifting height of an electric truck is generally 200 mm, which is just enough to lift the pallet off the ground, keep a certain distance from the ground, and move freely

Check the handbrake and footbrake; 3

Which brand is suitable for transporting electric flatbed trucks? The sales market's requirements for electric trucks are increasing day by day, and local manufacturers, sellers and retailers are all emerging on a large scale

Electric forklifts are small in size and much easier to operate than internal combustion forklifts

Parking (1) Release the direction select switch

Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use

Forklift driver's license, as the name implies, is a necessary professional certificate for forklift drivers

The function of the outriggers is to ensure the stability of the forklift when loaded

High stability coefficient: All mechanical material equipment must make progress in stable design, otherwise it will be difficult to develop in the long run

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

The reach forklift among warehouse forklifts has a gantry that can move forward or retract as a whole

BYD lithium battery forklift maintenance and maintenance methods -

4 When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust

When the chassis tilt exceeds the tolerance, the entire vehicle will issue an alarm signal and prohibit lifting operations

When putting down the load, the mast can be tilted forward slightly to facilitate placing the load and pulling out the fork

They fully consider the safety and comfort of the driver and combine many ergonomic designs to make it easier for the driver to get through the running-in period

The above is the editor's compilation of common fault troubleshooting methods for electric transport trucks

As an electronic component for real-time monitoring, automatic balancing, and intelligent charging and discharging, the battery management system plays an important role in ensuring safety, extending life, and estimating remaining power To ease the pressure and anxiety of warehousing and logistics operations, we must first speed up the pace to improve the efficiency of warehousing and logistics work

Especially in ports, warehousing, tobacco, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

If there is oil on the surface, wipe the white towel with alcohol (when parking)

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info