激情文学亚洲,久久久区,亚洲无线一二三四区手机

BYD workshop dedicated forklift charging- Even if the forks of the battery transporter can pass through the sockets of the double-sided pallet, they cannot be lifted

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

An electric forklift with excellent quality and simple operation is also very important

Before moving, the goods to be moved need to be stacked high, which can effectively save space and improve space utilization

We also have our counterbalanced forklift, which is one of the most widely used types of warehouse forklifts

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

SZ), and Dongjie Intelligent (300486 ※ The brake function is normal

Most of the batteries used in forklifts are lead-acid batteries, but they have gradually been replaced by lithium batteries

Moreover, it is also easy to maintain, and even if it encounters a malfunction and needs to be repaired, it can be easily solved

Using them brings great convenience to our work and can also reduce labor costs and manual labor

BYD workshop dedicated forklift charging-

(3) Ensure that the battery pack has sufficient power

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

With the same brushless all-AC motor, maintenance-free AC front drive, lead-acid battery/lithium battery, the price of a 2-ton ride-on forklift is only about RMB 50,000

Due to the nature of the goods themselves Forklifts have large carrying capacity, large volume and weight

The application of wet braking has greatly improved the reliability of the drive axle ※ The operating function is intact Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

If you have purchased a forklift before and it is a second-hand one that has been around for some time, the cost of repairing it is too high, so prepare to buy a new one

Lifting control Turn on the key switch and operate the handle in the indicated direction to raise or lower the fork

, a subsidiary of Hangcha Group, achieved sales of 120 million forklift AGV bodies in 2019

In order to help companies save space to the greatest extent, electric forklift manufacturers often design the tail of the forklift into an arc shape with a turning center as the core

Now, the electric forklift manufacturer will tell you what are the characteristics of the full-electric transport truck

Cargo storage and retrieval action flow Since the action flow of a single storage of goods is the same as the constituent actions of a single pick-up and placement of goods, and the action flow is similar, this paper takes the action flow of a single storage of goods as the research object and conducts design

During the unloading process, rapid descent and unloading are strictly prohibited; 12

The following is shared by BYD forklift editor: 1

BYD workshop dedicated forklift charging-

of the forklift

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

Forklifts now At present, lithium batteries have been widely used in the global forklift industry due to their many advantages such as high energy density, small size, maintenance-free, fast charging, and long service life

Today, electric transport truck manufacturers will tell you how to choose pallets for electric transport trucks

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

The turning radius of a three-wheel forklift is much smaller

During the unloading process, rapid descent and unloading are strictly prohibited; 12

5-5 tons, including counterbalance and three-point

Low temperature resistant grease In order to prevent the hardening phenomenon caused by low temperature, the working hydraulic oil uses special hydraulic oil that changes its viscosity characteristics under low temperature environment, and the lubricating grease should also be selected with good low temperature characteristics Correct use and maintenance are related to the service life of the forklift

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

Various parts on the vehicle can be replaced in a very short time

It is characterized by no beams, high body strength and can withstand heavy loads

The impact of low temperature environment on forklifts Compared with ordinary logistics operations, the special low-temperature operating environment of cold storage will have many impacts on the normal operation of forklifts, mainly including: 1

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info