国产精品天天狠天天看,91你懂的,天干天干天干夜夜爽av

BYD lithium battery forklift maintenance and operation process pictures- Finally, check whether the seals of the electric pallet truck are damaged

It is not very cost-effective

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

Although the price is higher than that of internal combustion forklifts, its operating cost is lower than that of internal combustion forklifts

Check whether the contact points are worn

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

At an ambient temperature of -20℃, extremely high requirements are placed on the normal operation of forklifts, and continuous technological innovation is needed to cope with and solve various technical problems of cold storage forklifts

If you still have questions, you can consult the electric transport truck manufacturer

However, as the country's environmental protection requirements continue to increase, the market demand for diesel forklifts will gradually decrease in the future

(4) When a forklift approaches or removes objects, the vehicle speed should be slow and steady, and care should be taken not to crush objects, wooden mats, etc

In 2020, benefiting from the rapid recovery of domestic industrial manufacturing from the epidemic, the overall production and sales of the forklift industry increased significantly

Warehouse forklifts are mainly designed for handling goods in warehouses

First, turn on the emergency cut-off switch of the electric pallet truck

BYD lithium battery forklift maintenance and operation process pictures-

Current status and future development trend of China's forklift sales in 2022 [Figure] 1

Check whether the electronic control board is damaged

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

There are two installation methods for the travel motor: vertical and horizontal motors Precautions after using electric forklift in warehouse: 1

lead-acid), so no parameters need to be changed to manage the battery

"No cobalt" and "lower lithium content" complete the battery's environmental compatibility and significantly reduce waste disposal costs

After stopping using the electric pallet truck, turn off the key switch and remove the key

If the lifting height is too high, whether it is a three-section mast or a two-section mast, the mast height is about 2

What are the advantages of lithium battery forklifts? With the development of society and the advocacy of environmental protection in various places, there are more and more energy-saving products on the market

In addition, iron batteries can be fast-charged in 1 hour and can be used at any time without affecting the battery cycle

go ahead 1

When the electric transport truck is not in use, put the fork to the bottom and store it in a designated location without affecting other operations

BYD lithium battery forklift maintenance and operation process pictures-

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

(7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances

Without flexible lifting and handling tools, it is impossible to move goods by manpower alone

It is an indispensable component in power and energy storage batteries

What should I pay attention to when using an electric transport truck? What should I pay attention to when using an electric transport truck? Electric transport trucks are also called electric pallet trucks in the industry Compared with traditional electric pallet trucks, it is more compact and flexible, can operate in narrow spaces such as carriages and elevators, is easy to operate, and has a more acceptable price

They are equipped with a variety of protection devices such as emergency contact safety devices, automatic alarm devices, emergency stop button devices and object detectors, which can avoid injuries to workers and damage to warehouses, other equipment and buildings, and reduce work risks

Flexible configuration of the forklift for subsequent use

The rated center distance refers to the horizontal distance from the center of gravity to the vertical forearm of the fork when a standard weight of cargo is placed on the fork of the electric forklift

Electric warehouse forklifts are suitable for indoor and outdoor use and have low noise

Cars and other eight series of products

They have become the first choice of logistics handling equipment for many companies, resulting in good industry user reviews and brand awareness

It plans to increase the promotion and publicity of such products in 2020 to accelerate market penetration

■ High power The dual-motor integrated design greatly improves the load capacity of the electric forklift

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info