亚洲国产精品久久久就秋霞,欧美中文,久久精品伊人一区二区三区

BYD forklift maintenance specifications latest- 1

The electric pallet trucks produced by electric truck manufacturers also have these unique advantages: they have a powerful pump station that reduces energy consumption by 50%; the integrated operating handle includes stepless forward and reverse functions and an emergency reverse button to ensure the safety of the operator; and they use the mortise and tenon structure technology of Lu Ban's 72 knots, which makes maintenance easy

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

One side of the item should be against the shelf, and the weight of the fork load should comply with the requirements of the load center curve sign If the vehicle has a braking function, the kinetic energy during deceleration can be recovered

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded ②The floating charging device effectively prevents overcharging

As a short-distance cargo transportation vehicle, they often carry heavy cargo

If there is no float, check whether the distilled water is level with the bottom of the distilled water bottle

BYD forklift maintenance specifications latest- Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; 8

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

The ambient temperature should not exceed 40°C

The constant pressure spring pressure borne by the carbon brush should be normal, and the total area of the carbon brush during the running-in period should not be less than 80% Some leading forklift companies with keen market sense have also quickly captured this trend and have taken action2M and 1 In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

Most of the batteries used in forklifts are lead-acid batteries, but they have gradually been replaced by lithium batteries

There is no environmental pollution, and it can meet the requirements of more application scenarios, expand the scope of application, and increase more business opportunities; 4

Anhui Yufeng Warehouse Electric Transporter Product Advantages: ?Electronic control, controller with multiple automatic protection systems

Therefore, when companies choose batteries for electric transport trucks, they should pay attention to checking the anti-counterfeiting mark of the product, whether the quality assurance card, maintenance card, etc

BYD forklift maintenance specifications latest-

So, how wide should the passage be reserved to make the best use of the factory? The electric forklift manufacturer will explain it in detail

Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading

1 Strictly follow the following rules: The following is shared by BYD Forklift Editor: 1 The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

I have seen no less than 50 configurations

A detailed look at the Class II vehicle market - electric ride-on warehouse vehicles The market for three types of vehicles has indeed seen great development in recent years: The development history can be found in the "Evolution of Pallet Trucks" written by Qin The central idea is to replace manual lifting with electric lifting

Usually, the front overhang of an electric hydraulic forklift, the length of the forklift fork/pallet and the safety distance are all fixed values

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly Check the tire screws and tires According to the response from Anhui Yufeng Warehousing Business Department, many customers are now calling to inquire about matters such as electric transport truck agents and electric pallet truck wholesales 2

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info