无码人妻av一二区二区三区,欧美超大胆裸体xx视频,日韩欧美操

BYD palletizing lithium battery forklift lithium battery components diagram- The heat of DC motor is mainly generated in the internal parts of the electric forklift, so most DC motors are equipped with a fan for heat dissipation As the cost of unmanned forklifts decreases year by year and the system functions improve year by year, this type of narrow-aisle storage unmanned forklift will be more popular in the scene with high requirements for storage efficiency and storage capacity

Hydraulic system 1

Strong safety: The explosion-proof electric forklift adopts an all-steel structure and the surface is coated with anti-corrosion paint

The above is a detailed tutorial and precautions for operating an electric forklift to pick up goods The product used in this solution is the 610X in the 600 series wheel drive planetary gearbox, which best meets customer needs and can be connected to high power density electric motors

Hydraulic system (1) Lifting hydraulic cylinder, the top of which is fixed to the lifting gantry, controls the lifting or lowering of the fork

The safe use of electric forklift batteries is an important issue

There is no need to replace easily damaged electronic parts, so electric forklifts are more economical

No speeding is allowed

To replace the drive wheel, first remove the motor wires, then remove the wheel fixing bolts and tap them out gently with a hammer

②The battery is the energy source of the forklift

Based on the market application scenario, the key parameters, safety detection, and storage action flow of the product are first designed overall; then, for the hydraulic synchronization problem in the lifting system, specific design schemes are proposed from the mechanical structure and hydraulic system aspects; finally, the feasibility of the scheme is verified through prototype testing At the same time, manufacturers are encouraged to actively promote product upgrades and install safety monitoring devices in advance Forklifts are classified according to drive mode Source: Compiled by Gongyan

BYD palletizing lithium battery forklift lithium battery components diagram- At the same time, due to the heavy weight of the cargo, in order to ensure the rigidity of the telescopic gantry at a high position, this unmanned forklift is designed with a double telescopic gantry

The third step is to adjust the height of the forks

When working under weaker road conditions, the key is to moderately ease the pressure and reduce the driving speed

The system has different power modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more energy-saving and environmentally friendly

The larger the load, the more expensive it is Check and adjust the battery sulfuric acid ratio, clean the battery surface, and tighten the battery terminals Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power The latter requires manual pulling or pushing of the forklift, and the lifting is electric37~15 7

Note: If the fully electric pallet truck works in a cold and humid environment, it should be equipped with low-temperature oil to adapt to the environment

The correction method can be used to eliminate the deformation of the mast of the electric forklift

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage Wherever I went, I saw that most of the products produced by the manufacturers were similar

BYD palletizing lithium battery forklift lithium battery components diagram- Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging 11

Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

It focuses on the use needs of different industries, conducts in-depth research and development, and provides the most suitable industry-customized product services 7 The safety performance is much higher and it can operate for a long time, which greatly saves on labor costs

Electric pallet trucks are suitable for heavy loads and long-term cargo transfers, which can greatly improve cargo handling efficiency

Otherwise, it is easy to damage the ground and forklift wheels, and it will cause accidents such as cargo collapse, damage to buildings and injuries to personnel

Battery capacity: 80V/700Ah 5

Its principle is to transmit three-phase AC power to the fixed stator winding, generate a rotating magnetic field to induce the closed rotor winding to generate current, and the rotor rotates along the direction of rotation of the rotating magnetic field under the action of electromagnetic force The use of this equipment will not only reduce operating costs, but also protect the working environment to a certain extent, because this equipment has the characteristics of environmental protection and noise reduction

The forks can be tilted forward and backward following the hydraulic cylinder

Electric forklift It uses electric motor as power and battery as energy 5

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info